We are not able to describe the lines with the info we have. It is marked on ISO headforms.) Its goal is to prepare European standards for all types of protective helmets. Also reachable at the email address: privacy@kask.com, REGISTER TO OUR NEWSLETTER Sign up to the KASK newsletter to receive all our latest product news. Hot: 47 to 53 degrees C (F 117 to 127 degrees). Australia/NZ Ambient: 18 degrees to 25 degrees C (F 64 to 77 degrees). Kask is a famous company to make the track helmets. Second impact on each sample except UV-wet sample is specified with "no reconditioning," which may address question of maximum time out of conditioning environment. The commissioners set policy for the CPSC. https://www.astm.org KASK S.p.a. ad unico socio Via Firenze, 5 24060 Chiuduno (BG) - ITALY Phone + 39 035 4427497 KIT-WAC00003/WHE00020-WHI 13 - RE 679/16 Kask Super Plasma HD Safety Helmet. cold, wet) are tested for impact attenuation on flat and hemispherical anvils, with four impacts each, on any anvil. KASK helmets, based in Italy, specialises in developing, designing, and manufacturing of safety helmets of the highest quality. The agency reports to Congress and the President; it is not part of any other department or agency in the federal government. AIS is the Abbreviated injury scale: The Abbreviated Injury Scale (AIS©) incorporates current medical terminology providing an internationally accepted tool for ranking injury severity. The chin strap includes a chin pad for comfort and is completely washable. (May have been updated for 1996)  The Plasma AQ’s lightness is made possible by the high-density polystyrene insert, which absorbs impact forces. Helpful. Chin area shape is specified in headform dimensions. It presently releases a new helmet named Rex. Tilt headform forward 45 degrees, attach hook to rear rim and strap run over helmet and down to a test apparatus permitting a 4 kg weight to drop .6 meters and hit a stop, jerking the strap. System check before and after each series of tests (at least a beginning and end of each test day) by dropping onto MEP a 146 mm aluminum spherical impactor mounted on ball-arm connector of test assembly with combined weight of 5 kg +/- 0.1 kg. Eight Working Groups are currently active under TC 158, and WG 11 is focused on: Shock absorption including measuring rotational kinematics from oblique or normal impact. Final Rule that took effect as U.S. law on March 10, 1999. ASTM: Complete test record must be kept for all certification testing performed by manufacturer or independent lab on paper, electronic format or photographs. Wet: none. If helmet is to be tested for impact the area to be tested is directed toward the lamp, with the plane tangential to the outer surface normal to the radius of the cylindrical holder. Strap must remain intact and not elongate during or after test more than 30 mm. Center of mass of assembly within 10 degree vertical cone from point of impact. JavaScript seems to be disabled in your browser. *, https://www.standards.org.au/search-for-a-standard. Looking for KASK Climbing, Work/Rescue Helmet, Type 1, Class C ANSI Classification, Super Plasma (53DH64)? CPSC: Flat, 47 to 49 mm radius hemispherical and curbstone. None of the protective components can become detached during impact test. The first is to offer the greatest amount of protection through the … Oblique impacts could lead to a tangential force, depending on the Normal force and the coefficient of friction (human head C.F. ("Japan"). Does not vary with head size. Strap elongation cannot exceed 5 mm per 300 mm when loaded with a 22 kg weight. All KASK cycling helmets have undergone this test and have exceeded its requirements. No part can have a resonant frequency "liable to affect the measurements." In every field of application KASK helmets are at the forefront, be it skiing, cycling, mountaineering, horse riding, rescue or safety world. ... this added with the lime green 3m ear protection and smoked black visor works like a dream and I don’t have to wear safety glasses unless it’s a super windy day Read more. Standards New Zealand is a business unit within the Ministry of Business, Innovation and Employment. All KASK products are 100% made in Italy and passed through the most rigorous safety and quality tests of the KASK’s distinctive CSD Project – ComfortSafetyDesign. Cold: -13 to -17 degrees C (F 9 to -1 degrees). Europe: No impact of the 20 required in the test series can exceed 250 g peak in 1.5 meter drop on flat or kerbstone anvil. Base must be "monolithic," made of steel, concrete or a combination of the two, and have mass of at least 500 kg. JIS T 8134-1982. Detailed test reports can be found here. CPSC: Velocity must be measured to an accuracy of 2 per cent within last 40 mm of free fall. Five sizes (A,E,J M and O) specified. Must be in language of the country of sale. Velocity of headform must be equivalent to a drop height of 1.49 to 1.51 m. ASTM: Peripheral vision of 105 degrees from centerline required on both sides. AIS is an anatomically based, consensus derived, global severity scoring system that classifies an individual injury by body region according to its relative severity on a 6 point scale (1=minor and 6=maximal). Kask Super Plasma Black 4.7 out of 5 stars 66. KASK, based in Italy, specializes in developing, designing, and manufacturing of safety helmets of the highest quality. Helmet must not come off the headform or tilt forward more than 30 degrees. KASK safety, Chiuduno (BG). CEN provides a platform for the development of European Standards and other technical documents in relation to various kinds of products, materials, services and processes. KASK. Must keep records for three years and make available to CPSC if requested within 48 hours if not on factory site. Kask Mesh Visor for Super Plasma Helmets The Kask Super Plasma visor is a finel mesh that protects against dust and abrasion and can be used over glasses. CPSC: Two sets of four samples required. The Kask Zenith Helmet is non-vented with an ABS external shell to offer head protection from falls and impact. KASK has been awarded with prizes like ISPO and Eurobike. Helmets for riders four years old and younger: test line on the AA headform begins in back of head at 8 mm above basic plane. We assure you that, in any case, the cited subjects will only transfer the data that is necessary and relevant to the purposes of the processing for which they are responsible.We also report that they may become aware of the data concerning you, the managers of company databases as well as those in charge of the company functions related to them. Impact conditions are based on real accident data. It's one of the best road bike helmets we've tested and … Also requires record of the parameters and results of retention tests, name and location of the test lab, signature of the technician performing the test, test date and calibration test results. These intakes are equipped with protective aluminum anti-intrusion grills to deflect debris and water. Australia/NZ Four single impacts anywhere above test line, separated by not less than one-fifth of the circumference of the helmet measured at "the nominal AA' line," shown as 12.7 mm above the Reference Plane. Europe: Easily legible markings throughout life of helmet Standard number, name or trademark of manufacturer, model, pedal cyclists' helmet, size in cm, weight, year and quarter of manufacturer, and "an appropriate warning" if shell adversely affected by solvents and such. A fifth (ambient) sample is tested with a single impact on the curbstone anvil  For helmets for riders under 5 years of age, line begins on the ISO E size headform in front at a point 57.5 mm above the basic plane, dropping at a point 27 mm in front of the cg to 40.2 mm above the basic plane and dropping again at a point 32 mm behind the cg to a point 11.5 mm above the basic plane. Chin strap is fastened under two metal rods 12 to 13 mm in diameter and separated by 75 to 77 mm, representing the jaw, from which hangs the test apparatus, weighing 10.5 to 11.5 kg, including the 4 kg drop weight. Must have housing for triaxial accelerometer "near its centre of gravity." Join the Best Workwear team by signing up to our newsletter and be the first to receive exclusive offers, news and reviews. The 4 kg weight is dropped for .6 m to dynamically load the retaining system while the pre-load falls away. Helmet is supported on a headform and preloaded with bean bag filled with 5 kg of lead shot. Helmets fitting two headform sizes are tested on both unless manufacturer also makes a smaller model fitting the smaller headform. Helmet must not lose any pieces representing more than 10 per cent of its mass during testing. The Kask Protone uses Kaske’s Octo Fit adjustment system, which helps to make the Kask Protone one of the most highly adjustable road helmets on the market, and one that fits an extremely wide range of head shapes. These comparisons are for size medium, ISO J headform. There are five headforms (A, E, J, M and O) in the body of the standard and three more (C, G and K) in a table defining the test area which has 8 sizes. It then angles downward toward the front at a 15 degree angle, with the final dimension above the basic plane not called out, but appearing in the drawing to be about 42 mm above the basic plane. Introduction notes that "concern has been expressed that rigid peaks may cause rotational injuries to the head or neck during some falls, and facial injuries if they shatter or break off." Even assuming that the statement refers to the vertical axis as it emerges from the bottom of the headform, the effect on the test area cannot be determined. Aging: Exposed for 48 hours to a 125 watt xenon-filled quartz lamp at 250 mm followed by spraying for four to six hours with 1 l. of water per minute at ambient temp (not specified). Slippage of the buckle can be measured and recorded "for information purposes" separately from other elements that contribute to total extension when tested for retention. Since 2009, however, the agency has generally been led by five commissioners, one of whom serves as chairman. All KASK helmets successfully pass this test, with values that are never above a BrIC 0,390. Numerous Skanska employees are piloting the KASK Safety Helmets throughout the US. This group is known as the CEN TC 158 / WG 11. Vertical drop towards an 45degree impact angle. Australia/NZ None. "Basic plane" (Frankfort Horizontal Plane) is a horizontal plane through the upper edges of the skull's ear opening and the lower edge of the eye socket. in the helmet with a curved plate 100 mm in diameter underneath the liner. 2006, Deck et al 2007). Original paper copy of test summary must include manufacturer's name and location, model and size of helmets tested, identifying code for each helmet in each conditioning environment, observed temperatures in each conditioning environment, relative humidity and temperature of the laboratory, impact test results in sequence with location of impact, anvil, velocity and maximum acceleration. cold and wet samples each impacted at sites separated by 120 mm (measured on surface of helmet) two times with flat anvil and two times with hemispherical anvil. Second set of ambient, hot, cold and wet samples impacted once each on curbstone anvil. KASK is constantly researching and looking for ways to go beyond and improve the quality of KASK helmets even further. A headform and drop apparatus weighing 15 kg (total preload) is positioned in the helmet and buckled in, then yanked by a 10 kg weight dropped 300 mm. No specification for time out of conditioning before first impact. + wireless system: triaxial accelerometer + n. 3 ARS $129.95. Sample must be tested within 2 minutes after removal from conditioning environment and returned within 3 minutes or if kept out longer must be reconditioned for 5 minutes for each minute over 3, not to exceed 4 hours. CPSC: Entire area above the test line must meet impact standard, with impact sites centered on or above the test line. Some 12,575 ASTM voluntary consensus standards operate globally. KASK safety helmets are among the top brands in sports and outdoors; meeting and maintaining the highest standards (EN / ANSI / CSA / AS / NZS) to ensure the highest quality of the best protective equipment for the most demanding customers: be it cycling, downhill skiing, ski touring, mountaineering, climbing, rescue or work safety. Kask Safety Helmet Bag. Australia/NZ AS 2512.1 Permits headforms of "hardwood, metal or other suitable material." Oblique impacts are common in most sports (Otteet al. Impactor dropped on MEP three times at intervals of 60 to 90 seconds, at impact velocity of 5.44 m/s +/- 2 per cent (drop height 1.5 m plus friction allowance). CPSC: Guided free fall using twin wire or monorail test rig onto a steel anvil fixed on a rigid base. ASTM: Velocity measured in last 40 mm of free fall and must be within 3 per cent of specified velocities. KASK, based in Italy, specializes in developing, designing, and manufacturing of safety helmets of the highest quality. Helmet is stabilized in ambient conditions for 24 hours before any further conditioning or testing. Europe: Must record identification details of helmets tested, including sizes, as well as results of impact and retention system tests, date of testing and name of testing authority. Place helmet on ISO full chinpiece headform according to manufacturer's instructions. After a successful trial run of Kask helmets on a Washington, D.C., project, Jason Timmerman, environmental health and safety director at Skanska USA … Kask TEMPISH Safety. Helmets tested in condition as offered for sale, and must pass all tests with or without any included attachments. Europe: Two impacts on each of ten samples according to a test schedule which specifies the anvil and conditioning to be used. (Many European labs use a triple wire guidance system with headform cradled on a triangular dolly with a hole in the center which would drop away below anvil upon impact. KASK has always been committed to creating products that guarantee both maximum safety and comfort, exceeding all requirements set by international standards and norms in all industries within which KASK is present: cycling, skiing, horse riding, industrial, mountaineering, and beyond. Must be used with the Kask … (Not yet updated for 1996 version.) Mass of anvil mount at least 130 kg. (For buckle and strap strength see Retention System below.). Translation by Japanese Standards Association. Conditioning times 4 to 24 hours for cold, hot and wet. Helmet is supported on a headform and preloaded with bean bag filled with 5 kg of lead shot. The helmet is equipped with lamp clips and a visor attachment. Drop assembly exclusive of helmet must weigh 3.1 to 6.1 kg. Europe: Introduction says helmet "is intended to remain on the head in a bicycle accident and may cause strangulation by entrapment." Easy online ordering for the ones who get it done along with 24/7 customer service, free technical support & more. Sample should receive 1 GJ/msq. In part due to its small size, the CPSC attempts to coordinate with outside parties—including companies and consumer advocates—to leverage resources and expertise to achieve outcomes that advance consumer safety. At a point 36 mm behind the Central and Vertical Axis it begins rising and at 30 mm behind the axis it reaches 31 mm above the basic plane. 13 of the European Data Protection Regulation RE 679/16 also called General Data Protection Regulation (hereinafter "GDPR") and other applicable legal provisions concerning the protection of personal data and data security, informs you that the data collected which the concern may be the subject of treatment in compliance with the aforementioned regulations. Must be made of K-1A magnesium alloy. ASTM: Retention system tests before impact tests. Model # WHE00037.223 Catalog Page # 1637 ... Primary Category: ~Safety~Face Protection~Faceshield Replacement Visors Headform to be "smallest and largest claimed for that helmet type." Forward vision must be unobstructed at 45 degree angle downward from the basic plane and 25 degree angle upward from the reference plane above it. Peak of rotational acceleration, Peak of linear acceleration, HIC, BRIC (< 0,68). 9.1K likes. and I consent to the processing of my personal data Read the Privacy Policy. ASTM: Entire area above the test line must meet impact attenuation standard, but center of impact of the test apparatus must be at least 25 mm above the line. Size O is very large, for helmets with inside circumferences of 620 mm. Include model, manufacturer, month and year of manufacture, no helmet can protect against all impacts warning, impact damage may not be apparent, destroy or return to manufacturer for inspection after impact, fit instructions must be followed for maximum protection, substances which may damage, recommended cleaning agents, not for motor vehicle use. Has separate point loading test described under Point Loading. This semi-aero helmet from Kask is one of the most popular helmets available, and for good reason. CPSC: Must keep records on paper or electronic media showing that helmet was certified under a "reasonable testing program." Impact sites separated by at least 150 mm. No green permitted because green is mandated by child standard. 5)Second set of ambient, hot, cold and wet samples tested for impact attenuation with a single impact on the curbstone anvil. 3)Retention system strength tests on each of the first set of ambient, cold, hot and wet samples. (11 lb.). Australia/NZ Visors ("peaks") permitted. Australia/NZ Peripheral vision of 105 degrees on both sides, and front edge clearance 25 mm above basic plane (bottom of eye socket) through same 105 degrees peripheral vision clearance area. To find out more and view the test results for all KASK helmets, please visit our web page devoted to safety standards: www.kask.com/safety. Extension includes any buckle slippage. Resultant test line is parallel to the basic plane and begins in front 85 mm above the basic plane, stepping down to 60 mm at a point two thirds back. KASK is an Italian company leader in the design development and production of helmets for cycling, skiing, mountaineering, horse riding and safety at work. CG of headform must be at center of mounting ball and within 10 degree vertical cone from point of impact. (Not yet updated here for 1996 version.) Starting from 2020, every new KASK helmet that successfully passes the CEN TC 158 / WG 11 test will be easily identified by a dedicated "WG11 rotational and linear impacts test passed" tag. Must show: (1) Identification of helmets tested and production lot; (2) Test results, including failures and actions taken; (3)test description including Helmet Positioning Index used, (4)Manufacturer's name and address; (5) Model and size of each helmet tested; (6) Identifying information including production lot; (7) Environmental condition for each helmet, including temperature, duration of conditioning and the laboratory temperature and relative humidity; (8) Results of peripheral vision clearance test; (9) Any failures to conform to labeling or instruction requirements; 10) Results of the positional stability test; (11) Results of the retention system strength test; (12) Impact test results in sequence stating location of impact, type of anvil, velocity prior to impact, maximum acceleration in g's; (13) Name and location of the test lab; (14) Technician's signature; (15) Test date; (16) Calibration test results verifying the operation of the test rig, Records to be provided to CPSC upon demand on paper or by email. Must be made of metal and have "a low resonance frequency but not below 3000 Hz." Five samples of largest size and five of smallest sizes required, each impacted in two locations. CPSC: ISO-DIS 6220-1983. Safety helmets, Visors and Hearing protection. Concussive (AIS2+) values of BrIC for humans varied from 0,60 when scaled directly from animal data (Ommaya, 1985) to 0.68 when obtained directly from college football players (Development of rotational Brain Injury Criterion (BrIC), Human Injury Research Division, UNECE). KASK are an Italian based company specializing in developing, designing, and manufacturing of safety helmets of the highest quality. Through a process of consensus, these committees develop standards for Australia’s net benefit. The Zenith also protects against electrical hazards. Kask Safety Helmet Bag The KASK Safety Helmet Carrying Bag is the perfect accessory for protecting and transporting your helmet, keeping your helmets free from dust when you're... View full product details We also publish and sell New Zealand, joint Australia-New Zealand, and international standards. We form technical committees made up of stakeholders from government, business, industry, community, academia and consumers. ("CPSC"), Japanese Industrial Standard, Protective Helmets for Bicycle Users. We develop standards, technical specifications, handbooks and other publications and participate in international standards development as a member of the International Organization for Standardization (ISO) and the International Electrotechnical Commission (IEC). Hot: 48 to 52 degrees C (F 122 degrees) for four to six hours. It is lightweight, compact, comfortable and well-ventilated with its 10 air intakes that that provide efficient cooling and ventilation. As of today, the proposed test method is similar to the one used by ECE 22.06: Head form will carry different Instrumentation. For helmets for riders aged 5 and over, the test line for J size headform starts in front at a distance of 68.5 mm above the basic plane, stepping down at a point 54 mm behind the cg to 54.5 mm above the basic plane. KASK quality is a guarantee as a result of many carefully monitored safety tests and innovative technologies used in the designing of the helmets. They are lightweight, compact, comfortable, and well-ventilated with 10 air intakes. The agency was created in 1972 through the Consumer Product Safety Act. over the wavelength 280 nm to 800 nm, either measured or calculated. A major goal of WG11 is to define a test method to measure the ability of a helmet to absorb energy from a so called “rotational impact”. Four samples already impact tested (two large, two small, one of each the UV- wet conditioned sample) are suspended from a 12 mm diameter hook through a hole (drilled?) All anvils must be steel and solid without internal cavities. (Holborn 1943, Genarelli1983.Kleiven et al. CPSC: Impacts centered anywhere on or above the test line, with sites selected for most severe test in attempt to fail the helmet. Strap shall not separate or elongate more than 25 mm. ASTM: None. Cyber Monday deals on helmets: big savings on Giro, Met, Kask, POC Top lids at low prices – get ahead with these helmet deals we've found for … We do not enforce, regulate or certify compliance with standards. The United States Consumer Product Safety Commission (USCPSC, CPSC, or commission) is an independent agency of the United States government. (For buckle and strap strength see Retention System. Acknowledges that helmets may fail a test due to damage from prior tests, but the failure is to be considered a valid test result. A sliding weight of 4 kg is dropped down a bar for .6 m impacting against a stop at the bottom to dynamically load the retaining system. The Zenith also protects against electrical hazards. In every field of application KASK helmets are at the forefront, be it cycling, downhill skiing, ski touring, mountaineering, climbing, rescue or work safety. Flat and hemispherical anvils to be used on each set of helmets, but curbstone anvil used only once on a fifth ambient sample. The helmet fits two headforms if it is not physically difficult to mount on the larger headform and partially compresses the fitting foam on the smaller headform. Item # 53DH72; Mfr. Europe: Ambient: Not specified. All conditioning for 16 to 30 hours. Considering a requirement that visor deflect at least a minimum amount when loaded with a weight, or be detachable. + grade 80 closed-coat aluminum oxide abrasive paper 2)Second ambient sample subjected to retention system stability (rolloff) test. Shock absorption including measuring rotational kinematics from oblique or normal impact, I want to subscribe to the KASK newsletter and I accept the Privacy Policy. Australia/NZ Not to exceed 300 g, or 200 g for 3.0 ms, or 150 g for 6.0 ms. Drop heights of 1.45 to 1.80 m on flat anvil. The Kask Super Plasma HD Safety Helmet has maximum ventilation thanks to ten air intakes. Kask Super Plasma Work Helmet 4.6 out of 5 stars 48. Australia/NZ None. Europe: No test, but helmet strap must be able to maintain tension. A Pass/Fail criteria shall therefore be either: That setup would be permitted under this description.). Retention system tests are done after impact tests. Record to identify helmets tested, production lot, results including precise nature of any failures and specific actions taken to address any failures. Angelo Gotti, CEO of KASK, is recognized as one of the world's leading helmet experts with more than 30 years of experience in various industries. Australia/NZ No velocity sensor specified. I have read the information pursuant to Art. Ageing: none. Cold: -3 to -7 degrees C (F 41 degrees). We specialise in managing the development of standards. regardless of size. Velocity measured in last 40 mm of free-fall. Kask Many members of the CyclingTips team have used Kask helmets, and while different models were mentioned by various staffers, it’s this brand that gets the most suggestions. Dynamic extension must not exceed 35 mm, and residual extension two minutes later must not exceed 25 mm.
2020 kask safety helmets